ドイツのALPHALAS GmbHは教育目的のDPSSレーザーキット、LASKIT®-500 を製造、販売している。
http://www.alphalas.com/
※GmbH:ドイツの有限会社の意味
※DPSS:Diode pumped solid state の略。半導体励起固体レーザー

dpss_laser_kit

このキットの仕様は以下の通り

  • CW @ 1064 nm
  • Q-switched @ 1064 nm
  • Intracavity Frequency Doubled CW @ 532 nm
  • Intracavity Frequency Doubled and Q-Switched @ 532 nm
  • External Frequency Doubling of the Q-Switched 1064 nm

用途は

  • Education in Theory & Practice
  • Laser & Optics Research & Testing
  • Laser-Matter Interaction
  • Start-Up for DPSS Laser Development

これ、かなり便利だし面白いと思います。工業高校、工専、大学で導入するといいんじゃないかな。キットというだけあって、必要なものはそろってるみたいだし。

The LASKIT®-500 includes:

  • Pump laser diode with Peltier cooler and attached pump optics
  • Laser diode driver & thermoelectric controller LDD1-1T (optional: LPS1-2T, microprocessor-controlled)
  • Laser crystal Nd:YAG (Nd:YVO4 optional), with a heat sink
  • Set of two laser cavity mirrors (flat/curved)
  • Cr4+:YAG passive Q-switch, AR/AR coated
  • KTP frequency doubler with special coatings, in a holder
  • Mirror and crystal mounts (3 pieces)
  • Optical bench
  • Diode laser module (670 mm) for aligning the laser cavity, with holder
  • Infrared-to-visible converter (model IR-VIS-15-B), Ø 15 mm, for aligning the IR laser and mode analysis (also suitable for high-power lasers)
  • Ultrafast photo detector (model UPD-300-SP) with rise time <300 ps, spectral range 320 – 1100 nm, external power supply, suitable for observing the relaxation oscillations and pulse duration of the Q-switched mode
  • CCD linear array (model CCD-2000M) with 2048 pixels, high sensitivity, driver electronics and power supply, suitable for laser beam analysis, M² measurements, autocorrelators, etc.

でも、この構成を見るとかなり高そう。
学校でホイホイ買えるものじゃないですね。
買えるとしても企業と私立大学くらいかな。

レーザー関連の研究室だったら寄せ集めの光学部品で作れそう。

これを全ファイバ型のファイバレーザでやるならミラーもいらないし、
より安全でいいと思います。

即戦力ってのは言いすぎだけど、今ならかなりいい人材が育つかな。

ただ、ファイバーという繊細なものを取り扱うには知識とノウハウが必要で、
融着接続機という、レンタルをするにしても高価な機材も必要なのでどうかとも思いますが。。

製品化にご興味のある方はファイバレーザの知識・ノウハウを有する幣社までご連絡を。

【編集後記】
日本にもっとレーザー企業が増えないとお金が外資にいきます。
確実に。